01
Head, pressure and flow are conflated
Pump flow at the required head is not the same as maximum nominal flow. Compressor selection needs specified working pressure and delivered capacity at stated conditions, not motor size alone.
Manufacturing / Pumps and compressors
GEO promotion for industrial pump and compressor suppliers
An engineer selects a pump by fluid properties, flow and head, while compressors are chosen by working pressure, delivered air and air-quality needs. These are different engineering tasks. I assess whether AI recommendations match the required duty point and genuine supplier capability.
- Separate non-brand prompts for pumps, compressors and end applications
- Duty-point, model, documentation and service verification
- Technical content supported by evidence and repeated BMR measurements
Selection barriers
Why a power rating alone cannot identify the right pump
Duty conditions, medium and system configuration determine machine suitability and long-term operating cost. A single catalogue figure cannot settle the choice.
02
Fluid or air requirements are missing
Viscosity, temperature, solids, corrosion and suction conditions affect pump applications. Compressed-air systems also require suitable quality, moisture control and duty assumptions.
03
After-sales claims are unverified
Service interval, available parts, response times and the distinction between manufacturer and distributor responsibilities need evidence.
Buyer intents
How engineers ask AI to identify suppliers
These are candidate measurement prompts rather than engineering selection instructions. Product suitability must be checked for the real system by competent engineers.
| Engineering question | Required evidence | GEO improvement |
|---|---|---|
| Which supplier has a water pump operating at our required flow and head? | Q-H curve, efficiency, suction conditions and material specification | Publish searchable duty-point evidence and fluid applications |
| Who can supply a chemical process pump for a corrosive fluid? | Material compatibility, sealing, liquid properties and operating limits | Distinguish genuinely supported media and machine versions |
| Who sells screw compressors for continuous factory operation? | Working pressure, delivered capacity, cooling, duty and maintenance | Describe verified compressor ranges and service options |
| How do we compare compressor station lifecycle cost? | Energy draw at realistic duty, controls, filtration and maintenance | Explain comparative assumptions rather than list price alone |
Verifiable facts
Evidence that makes an equipment recommendation defensible
I compare brochures with duty curves, manuals and the actual application. TR CU 010/2011 and TR CU 032/2013 have defined scopes and categorisation rules; their existence does not certify every pump or compressor configuration.
- Pumps: Q-H duty point, fluid, temperature, materials, seals and permitted operating range
- Compressors: working pressure, delivered flow units, air quality, energy use and expected load cycle
- Model-specific documents, applicable compliance, service territories, warranty and spare-part provenance
This page describes an evidence-led GEO diagnostic method. No completed result for a named pump or compressor supplier is claimed.
Methods and sources
Scope of work
A procurement-focused GEO process
Segment industrial questions by application and duty point, then evaluate both visibility and technical correctness of AI answers.
Collect engineering intents
Separate pump and compressor applications by demand, fluids, pressures, regions and service requirements.
Validate supplier specifications
Review curves, manuals, performance conditions, units and the real scope of supply.
Improve technical content
Create briefs for equipment families, applications, selection methods, servicing and verified technical FAQs.
Measure recommendations again
Repeat the prompt set and inspect BMR alongside whether the suggested equipment fits the original specification.
Current pricing
Audit and monthly GEO plans for this specialization
Three published monthly plans use the same GAEO prices across sectors. Final scope follows the baseline and project requirements.
Monthly serviceGEO promotion
from RUB 79,900/monthI lead the strategy; your team implements website and content specifications.
GEO promotion
from RUB 79,900/month
I lead the strategy; your team implements website and content specifications.
- From 50 prompts and 5 AI platforms
- Intent map and website specifications
- Expert content briefs
- Distribution, links and reputation
- Monthly reporting
- Prepayment for the current month
Monthly serviceGEO + content
from RUB 99,900/monthI study your product, create the content and organize publication.
GEO + content
from RUB 99,900/month
I study your product, create the content and organize publication.
- All core GEO promotion activities
- From 50 prompts and 5 AI platforms
- Expert content creation
- Publication and distribution
- I implement website changes or provide specifications
- Prepayment for the current month
Monthly serviceGEO with financial guarantees
from RUB 114,900/monthContractual BMR targets: baseline +5 / +10 / +15 percentage points in months 1 / 2 / 3.
GEO with financial guarantees
from RUB 114,900/month
Contractual BMR targets: baseline +5 / +10 / +15 percentage points in months 1 / 2 / 3.
- From 50 prompts and 5 AI platforms
- I implement and improve the website, and create content
- BMR targets: baseline +5 / +10 / +15 pp
- 50% fixed + 50% bonus at the target BMR
- Comparable measurements and monthly reporting
Start with a free mini-audit or a full GEO audit. A monthly plan includes 50 prompts and 5 AI platforms; broader scope is calculated separately.
FAQ
Questions about the service
Can a pump be selected by motor power alone?
No. Flow, required head, medium properties, suction conditions and the performance curve must be considered. Motor power is not evidence of fit.
Why compare compressor delivery at the same duty?
Delivered flow depends on working pressure and measurement conditions. Any comparison needs consistent units and a clearly defined duty point.
Does TR CU 032/2013 apply to all compressor models identically?
No. Applicability depends on the exact equipment and regulatory scope. Model-level confirmation is needed before making conformity claims.
How should spare parts and support be described?
Use verified models, part references, coverage areas, supply terms and actual supplier responsibilities. Selling spares does not establish manufacturer authorisation.
What does GAEO charge pump and compressor suppliers?
The published GAEO plans apply. Scope depends on the product families, technical applications, regions and prompt baseline.
Responsible specialist
Alexey Yakovlev
Independent GEO/AEO specialist with business experience since 2008. I personally carry out the diagnostic and build an industry-specific plan, separating verified sources from assumptions.
Professional biography ↗Discover which pump and compressor vendors AI recommends
Share your site, equipment families, authorised performance documents and major applications. I will define suitable prompts for an initial measurement.
Discuss an initial audit